Basement insulation in Jerome ID - warm walls, with the moisture handled first
Cold floors upstairs and a chilly, damp-smelling basement? We check the walls for moisture first, then insulate so the room holds its heat.
What basement insulation does for your housein Jerome, done in the right order
Most calls about basement insulation in Jerome, ID start upstairs, with cold floors, a drafty family room or a power bill that climbs all winter. Bare concrete walls let heat slip out every cold day, and a basement that smells damp tells us water is part of the story too.
We don't insulate over a problem. Any dampness on the concrete gets sorted out first, so the insulation goes onto a dry, sound wall. Then we pick the material that suits the wall in front of us and the way you use the room, and we explain why before anything gets ordered.
The price mostly turns on how much wall there is, which material fits it, the covering foam needs and any water fix that has to come first. The schedule turns on that same fix and on the permit question, which we sort out with the building office for you.
You can count on us to explain what's going on with your basement walls before we touch them, so call (208) 544-9045 and we'll come take a look.
Basement insulation for the walls you have
We start with what your walls are made of and whether they stay dry, then choose the material and covering that suit them and the way you plan to use the room.
Closed-cell foam on concrete
On bare concrete we lean toward closed-cell foam insulation, a dense foam that also blocks moisture, and we put the covering it needs into the plan from the start.
Open-cell foam on framing
Open-cell foam insulation is lighter, seals air well and usually costs less, so we walk you through where it fits your basement and where closed-cell does the job better.
Rim joists and gaps
The band of wood sitting on top of the foundation is one of the draftiest spots in a basement, so we seal and insulate it along with the walls.
Why homeowners choose Steady Jerome Spray Foamfor basement walls in Jerome
We walk you through what's happening in your basement before we touch anything, so you understand your house well enough to judge our work and the next contractor's too.
I look at it myself
I come out to see your basement, answer your questions and write the estimate, so the person explaining the plan is the one who checks the work.
Back in the trade since 2021
I ran insulation jobs years ago, missed the work, and came back to it in 2021, and we've been in business the five years since.
Licensed and insured
We're licensed and insured, which is the first thing worth asking anyone you're about to let into your basement with a spray rig.
Fixes go first on the list
If we find a leak, a wet spot or wiring that worries us, it goes at the top of the plan, because insulation over it just hides the trouble.
Our own installers, checked by me
Our own installers do the work, and I check it before we call the job done, so you always know who was in your basement.
Your basement walls, checked and pricedon a visit from Steady Jerome
Give us your basement's rough wall area in square feet and any signs of water you've noticed, and we'll reply within one business day to set up a visit. The on-site estimate is free, with no pressure and no obligation.
How the job runsfrom your call to the walkthrough
We keep a basement job simple by putting the plan in writing with the fixes listed first, and by telling you what's happening and why before each step starts.
You call or write
Call (208) 544-9045 or send a note through the form, and we get back to you to set up a time to look at your basement.
We look at it together
We go over the walls, the rim joists and any damp spots with you, take photos, and write a plan that puts anything needing a fix at the top.
Fixes and the permit
Once you say yes, any water problem gets handled first, and we check with the building office for your address, then file the permit and set up inspections if it's needed.
The insulation goes in
Our installers prep the space, insulate the walls and rim joists in the order the plan sets, and put the covering the foam needs over it.
Cleanup and walkthrough
We clean up, then walk the finished basement with you so you can see what went in and judge the work for yourself.
Basement insulation questions
What is the best way to handle moisture before insulating basement walls?
Deal with the moisture first, because insulating basement walls without managing it can hide the problem and sometimes trap water against the wall, which makes it worse. Energy guidance puts moisture management at the top of the plan for that reason, and that's where we put it too.
What is the best insulation for concrete basement walls?
Closed-cell spray foam gives the best moisture control of any insulation used on the inside of foundation walls, and it stops air leaks well too. Open-cell foam also seals air well but has to go on thicker to hold back moisture, so ask which foam a quote includes. Either foam has to be covered with fire-resistant ignition-barrier paint or drywall, so plan for that in the budget.
Does an insulation contractor need to be registered in Idaho?
Yes, if the job runs over $2000.00 in materials and labor and the contractor isn't otherwise exempt, Idaho requires them to be registered. The state's licensing division oversees that registration, so it's a fair thing to ask anyone who bids on your basement.
How much does basement insulation cost in Jerome, ID?
Insulating basement walls across the US usually costs about $4.40 to $6.40 per square foot, which is a national figure for the wall insulation, not a Jerome quote. Your number moves with the material, the covering foam needs and any moisture fix that comes first. We'll price yours once we've seen the walls.
How do I keep a furnace or water heater safe when I insulate my basement?
Make sure fuel-burning appliances like a gas furnace or water heater are running properly and safely both before and after the basement is sealed and insulated. That's Energy Department guidance, because sealing a basement changes how air moves through it, so if those appliances live down there, plan a check at both points.
Should I put a plastic vapor barrier behind basement drywall?
Usually not on the room side of fiberglass, because plastic sheeting can trap moisture inside a basement wall. Guidance points to kraft-faced fiberglass batts or latex paint on the drywall instead, and it says fiberglass batts or cellulose shouldn't touch the foundation walls at all.
Basement insulation around Jerome, ID
In Jerome, the city's Building Safety Department issues permits and inspects home projects, so once you hire us we check whether yours needs one and apply online if it does. We work in Twin Falls, Kimberly and other cities nearby too, so pick yours below or give us a call.
Get your Jerome basement insulation planbefore the framing goes up
If you're planning to finish the basement, the insulation and its covering are easiest to sort out before framing and drywall go up, so call (208) 544-9045 or send the form and we'll look at the walls with you.